Single & Double timber leaves - with flush door brackets
Flush door brackets allow an almost full height leaf to be used, bringing the door head into closer proximity with e.g. the ceiling, essentially only a shadow gap is left between the leaf and the track assembly.
N.B. Self closing and simultaneous opening (for double doors) cannot be specified with flush brackets due to the close proximity of door head to framing.
If concealing the door mounting bracket behind, (for example, a timber plug), this should be removable, to extract the bracket if needed.
To see how easy Portman is to install, view the Portman flush kit fitting instructions (PDF 1.8Mb) or watch the installation animation.
Single Doors
Standard door leaves (up to 2100mm high)
| Description | Part Ref's |
|---|---|
| Standard width door leaf | |
| 626-926mm wide x up to 2100mm high | P7101 SDF Add to specification |
| Intermediate width door leaf | |
| 927-1300mm wide x up to 2100mm high | P7101 IDF Add to specification |
| Wide door leaf | |
| 1301-1500mm wide x up to 2100mm high | P7101 WDF Add to specification |
Tall door leaves (up to 2700mm high)
| Description | Part Ref's |
|---|---|
| Tall door leaf | |
| 626-926mm wide x up to 2700mm high | P7101 TDF Add to specification |
| Tall/Intermediate width door leaf | |
| 927-1300mm wide x up to 2700mm high | P7101 ITDF Add to specification |
| Tall/Wide door leaf | |
| 1301-1500mm wide x up to 2700mm high | P7101 WTDF Add to specification |
For doors over 2700mm high or 1500mm wide please contact the sales office.
Dimensions (max door thickness 44mm)
Single Door
Wp = Door panel width
Hp = Door panel height
W = (2Wp)+11mm
H = Hp+72mm
Sp = Wp-9mm
Op = Wp-23mm
Oh = Hp-30mm
Decide what is your constraining factor. Either the door leaf size OR the available wall aperture will decide what should be specified.
Use the calculations above to derive the correct wall aperture or door leaf
Double Doors
Standard door leaves
(up to 2100mm high)
| Description | Part Ref's |
|---|---|
| Standard width door leaf | |
| 626-926mm wide x up to 2100mm high | P7101 DDF Add to specification |
| Intermediate width door leaf | |
| 927-1300mm wide x up to 2100mm high | P7101 IDDF Add to specification |
| Wide door leaf | |
| 1301-1500mm wide x up to 2100mm high | P7101 WDDF Add to specification |
Tall door leaves
(up to 2700mm high)
| Description | Part Ref's |
|---|---|
| Tall door leaf | |
| 626-926mm wide x up to 2700mm high | P7101 TDDF Add to specification |
| Tall/Intermediate door leaf | |
| 927-1300mm wide x up to 2700mm high | P7101 ITDDF Add to specification |
| Tall/Wide door leaf | |
| 1301-1500mm wide x up to 2700mm high | P7101 WTDDF Add to specification |
For intermediate and wide double doors kits please contact the sales office.
Dimensions (max door thickness 44mm)
Double Door
Wp = Door panel width
Hp = Door panel height
W = (4Wp)-16mm
H = Hp+72mm
Sp = Wp-9mm
Op = (2Wp)-34mm
Oh = Hp-30mm
Decide what is your constraining factor. Either the size of the door two leaves OR the available wall aperture will decide what should be specified.
Use the calculations above to derive the correct wall aperture or door leaves that can be installed.