Curved pockets for curved door leaves
Having a curved pocket door kit to accommodate a curved door provides the designer with a unique opportunity to create something really quite special.
The Portman curved kits accommodate leaves with a 1.5m radius (centreline of door leaf) as standard and the door frame detailing is as per the standard kit with surface mounted hangers and a curved head section to them.
Single Doors
Standard door leaves (up to 2100mm high)
| Description | Part Ref's |
|---|---|
| Standard width door leaf | |
| 626-926mm wide x up to 2100mm high | P7701 SDC Add to specification |
| Intermediate width door leaf | |
| 927-1300mm wide x up to 2100mm high | P7701 IDC Add to specification |
| Wide door leaf | |
| 1301-1500mm wide x up to 2100mm high | P7701 WDC Add to specification |
Tall door leaves (up to 2700mm high)
| Description | Part Ref's |
|---|---|
| Tall door leaf | |
| 626-926mm wide x up to 2700mm high | P7701 TDC Add to specification |
| Tall/Intermediate width door leaf | |
| 927-1300mm wide x up to 2700mm high | P7701 ITDC Add to specification |
| Tall/Wide door leaf | |
| 1301-1500mm wide x up to 2700mm high | P7701 WTDC Add to specification |
Dimensions (max door thickness 44mm)
Single Door
Wp = Door panel width
Hp = Door panel height
W = (2Wp)+12mm
H = Hp+95mm
Sp = Wp-9mm
Op = Wp-23mm
Oh = Hp-7mm
Decide what is your constraining factor. Either the door leaf size OR the available wall aperture will decide what should be specified.
Use the calculations above to derive the correct wall aperture or door leaf
Double Doors
Curved door leaves
(up to 2100mm high)
| Description | Part Ref's |
|---|---|
| Standard width door leaf | |
| 626-926mm wide x up to 2100mm high | P7701 DDC Add to specification |
| Intermediate width door leaf | |
| 927-1300mm wide x up to 2100mm high | P7701 IDDC Add to specification |
| Wide door leaf | |
| 1301-1500mm wide x up to 2100mm high | P7701 WDDC Add to specification |
Tall door leaves
(up to 2700mm high)
| Description | Part Ref's |
|---|---|
| Tall door leaf | |
| 626-926mm wide x up to 2700mm high | P7701 TDDC Add to specification |
| Tall/Intermediate door leaf | |
| 927-1300mm wide x up to 2700mm high | P7701 ITDDC Add to specification |
| Tall/Wide door leaf | |
| 1301-1500mm wide x up to 2700mm high | P7701 WTDDC Add to specification |
Dimensions (max door thickness 44mm)
Double Door
Wp = Door panel width
Hp = Door panel height
W = (4Wp)+18mm
H = Hp+70mm
Sp = Wp-9mm
Op = (2Wp)-34mm
Oh = Hp-7mm
Decide what is your constraining factor. Either the size of the two door leaves OR the available wall aperture will decide what should be specified.
Use the calculations above to derive the correct wall aperture or door leaves that can be installed.