Single & Double timber leaves
For installations where a minimal aesthetic is required and where the door opening needs to be frameless (i.e. without architrave), Portman offers a range of heavy duty custom door frame beading sections. These sections enable the skim coat to be painted / finished to blend in with the door frame for a minimalist aesthetic.
As standard, kits accommodate maximum 44mm thick door leaves. Kits are also are supplied with flush bracket sets.
N.B. Self closing and simultaneous opening (for double doors) cannot be specified with Architrave free/flush bracket sets.
*Can accommodate frameless glass leaves of up to 1280mm wide. Please add part suffix “G” to either standard OR intermediate with options below, for further information please see P1280 in Accessories.
To see how easy Portman is to install, view the Portman architrave free kit installation instructions (PDF 1.9Mb) or if using frameless glass door clamps Portman architrave free kit installation instructions for frameless glass (PDF 1.4Mb).
Single Doors
Standard door leaves (up to 2100mm high)
| Description | Part Ref's |
|---|---|
| Standard width door leaf | |
| 626-926mm wide x up to 2100mm high | P7300 SDE* Add to specification |
| Intermediate width door leaf | |
| 927-1300mm wide x up to 2100mm high | P7300 IDE* Add to specification |
| Wide door leaf | |
| 1301-1500mm wide x up to 2100mm high | P7300 WDE Add to specification |
Tall door leaves (up to 2700mm high)
| Description | Part Ref's |
|---|---|
| Tall door leaf | |
| 626-926mm wide x up to 2700mm high | P7300 TDE* Add to specification |
| Tall/Intermediate width door leaf | |
| 927-1300mm wide x up to 2700mm high | P7300 ITDE* Add to specification |
| Tall/Wide door leaf | |
| 1301-1500mm wide x up to 2700mm high | P7300 WTDE Add to specification |
For doors over 2700mm high or 1500mm wide please contact the sales office.
Dimensions (max door thickness 44mm)
Single Door
Wp = Door panel width
Hp = Door panel height
W = (2Wp)+12mm
H = Hp+70mm
Sp = Wp+24mm
Op = Wp-28mm
Oh = Hp+14mm
Decide what is your constraining factor. Either the door leaf size OR the available wall aperture will decide what should be specified.
Use the calculations above to derive the correct wall aperture or door leaf.
Double Doors
Standard door leaves
(up to 2100mm high)
| Description | Part Ref's |
|---|---|
| Standard width door leaf | |
| 626-926mm wide x up to 2100mm high | P7300 DDE Add to specification |
| Intermediate width door leaf | |
| 927-1300mm wide x up to 2100mm high | P7300 IDDE Add to specification |
| Wide width door leaf | |
| 1301-1500mm wide x up to 2100mm high | P7300 WDDE Add to specification |
Tall door leaves
(up to 2700mm high)
| Description | Part Ref's |
|---|---|
| Tall door leaf | |
| 626-926mm wide x up to 2700mm high | P7300 TDDE Add to specification |
| Tall/Intermediate door leaf | |
| 927-1300mm wide x up to 2700mm high | P7300 ITDDE Add to specification |
| Tall/Wide door leaf | |
| 1301-1500mm wide x up to 2700mm high | P7300 WTDDE Add to specification |
For intermediate and wide double doors kits please contact the sales office.
Dimensions (max door thickness 44mm)
Double Door
Wp = Door panel width
Hp = Door panel height
W = (4Wp)+18mm
H = Hp+70mm
Sp = Wp+24mm
Op = (2Wp)-32mm
Oh = Hp+14mm
Decide what is your constraining factor. Either the size of the two door leaves OR the available wall aperture will decide what should be specified.
Use the calculations above to derive the correct wall aperture or door leaves that can be installed.