Pocket door systems Sliding door gear

Pocket Door Kits

Pocket Door Kits

Standard Kits
Standard Kits

Portman's pocket door systems have been designed to provide an unrivalled size and design flexibility to make the most of the space available and create a unique visual statement. Our kits are modular with two heights and three widths as standard. The necessary wall aperture dimensions for the single or double Portman pocket door kits can be derived from the calculations and elevations shown bottom right.

Portman Standard Kits - our standard P7001 kits include top fixed door brackets...

Your kit has been updated. Click here to see your kit.
Add to kit
Flush Door Bracket Kits

Flush door brackets allow an almost full height leaf to be used, creating a stark visual statement by bringing the door head into closer proximity with the ceiling, so essentially only a shadow gap is left between the leaf and the track assembly. Portman supply a head profile as standard to fully conceal any light gaps, this may however be left off if desired. 

Nb. Suits door leaves 38-44mm thick only

For doors over 2400mm high, the use of the P5700 reinforcing kit is...

Your kit has been updated. Click here to see your kit.
Add to kit
Architrave Free Kits

For installations where a minimal aesthetic is required or where the door opening needs to be frameless (i.e. without architrave), Portman offers a range of heavy duty steel door linings. These sections enable the skim coat to be applied and the whole frame is then painted / finished to blend in with the surrounding wall.

As standard, kits accommodate doors 38-44mm thick, kits are also are supplied with flush bracket sets. For doors over 2700mm high or 1500mm wide, please contact the...

Your kit has been updated. Click here to see your kit.
Add to kit
Fire Rated - FD30/E30 Kits
Frameless Glass Door Kits

Standard plasterboard lined frames

Portman can provide both single and double door systems that are certified for use with FD30/E30 door leaves. The Portman FD30 system allows for an approved* single door leaf of up to 2700mm high and 1500mm wide to be installed and any standard FD30 44mm thick door leaf up to 2150mm high and 1030mm wide. This unique assembly opens up new opportunities to create innovative designs and room layouts freedom of choice allows once again...

Your kit has been updated. Click here to see your kit.
Add to kit
Fire Rated - FD60 Kits
Fire Rated - FD60 Kits

Doors for use with FD60 Portman kits are 44mm thick and of specialist manufacture and comprise a unique construction to comply with the scope of certification. FD60 approved kits are limited in size/surface area, please see below. For further guidance please contact the sales office. Portman doors can offer a wide range of finishes on an approved door blanks. 

Kit options: Standard 2100mm high door leaf

Standard width (626-926mm wide)

Intermediate width (927-1103 mm wide...

Your kit has been updated. Click here to see your kit.
Add to kit
Telescopic Kits
Telescopic Kits

The Portman telescopic doorset effectively allows two door leaves to be concealed within one wall (on the same side) and almost a double span to be traversed.

The door leaves are linked via a toothed belt and pulley system so as the user extracts the first door leaf the second is gently brought along with it and conversely the opposite happens when the doors are concealed back within the wall. The doorset is non handed and timber framing is supplied offset, as only one leaf makes...

Your kit has been updated. Click here to see your kit.
Add to kit
Curved Door Kits
Curved Door Kits

Having a curved pocket door kit to accommodate a curved door provides the designer with a unique opportunity to create something really quite special.

The Portman curved door kits accommodate leaves with a 1.5m radius (centreline of door leaf) as standard and the door frame detailing is as per the standard kit with surface mounted hangers and a curved head section to them. We can also manufacture curved door leaves to suit and mortice in any Portman hardware to ensure that the door...

Your kit has been updated. Click here to see your kit.
Add to kit
Frameless Glass Door Kits

Portman kits can be used to install a frameless glass panel of between 8 and 12mm thick. These kits use specialist glass door clamps containing a safety pins and a covering aluminium profile.

Two design options are provided, the P7001 **G (standard timber lined frame kit) and the P7300 **G (steel lined architrave free - see alternative website page). At time of publication self closing and soft closing cannot be used with frameless glass panels, please contact the sales office for...

Your kit has been updated. Click here to see your kit.
Add to kit
Glass Architrave Free

Portman kits can be used to install a frameless glass panel of between 8 and 12mm thick. These kits use specialist glass door clamps containing a safety pins and a covering aluminium profile.

Two design options are provided, here the P7300 **G kits (steel lined architrave free) or the P7001 **G (standard timber lined frame kit) - please see alternative web page here. At time of publication self closing...

Your kit has been updated. Click here to see your kit.
Add to kit

If you can't find what you're looking for please call us on 01462 444 466