Pocket door systems Sliding door gear

Accessories

Accessories (all)

Architectural Flush Pulls

Portman PH range of architectural flush pull handles are unique and comprise the latest laser cut stainless parts allied with an unrivalled range of aesthetic finish options. Three standard length options are available 150mm, 300mm and 600mm long. All flush pulls are designed to be bonded into the door face, two installation options are available, either the 3mm faceplate set proud of the door face, or for a minimalist finish a two step mortice with 5mm radii to faceplate corners, this enables the entire pull handle to be set in flush with the face of the door.

Sold in pairs complete with 25mm door end pull.

Parts:
PH7600: 600 x 60 x 17mm
PH7300: 300 x 60 x 17mm
PH7150: 150 x 60 x 17mm

Finishes:

SSS: Satin stainless steel (320 fine grit) to faceplate and to recess. 
PSS: Bright Polished stainless steel to faceplate, recess satin stainless steel fine grit
PNP: Slightly softer and whiter in colour than PSS, nickel plate also has self levelling properties which make for a slightly smoother final finish.Polished nickel to faceplate, recess satin nickel plate
SNP: Satin nickel plate, to faceplate and to recess
WHI: White Powdercoat RAL 9003 semi gloss, other RAL colours are available, please contact the sales office
ABR: Antique Brass, to faceplate and to recess. Electrobrass plated vertically distressed giving high and low lights, lacquer sealed.
SBL: Satin Brass Lacquered. Satin brass plate to faceplate and recess. Protective lacquer sealed to assist durability and prevent patination.
PBL: Polished Brass Lacquered. Polished brass plate to faceplate satin brass to recess. Protective lacquer sealed to assist durability and prevent patination.
OBZ: Old Bronze, to faceplate and to recess. Electrobrass plated artificially patina’d and relieved giving high and low lights, lacquer sealed.
DBZ: Dark Bronze, to faceplate and to recess. Electrobrass plated heavy patination and gently relieved giving rich dark brown/black colour, lacquer sealed

Frameless Glass Flush Pulls

Portman Frameless glass door pull handles are available in either Satin or Polished Stainless Steel to suit 8-12mm thick glass.All are back-to-back fixed and require a 49mm diameter through hole in the glass.

P7519 Flush Pulls

60mm diameter flush pulls (pr) Complete with 25mm dia leading edge finger pull (29mm OD) Suitable for use on single FD/E30 doors without additional intumescent. In double door leaf applications the leading edge pull must be bed in intumescent – part IP7519 Finishes: see options

P7515 Bathroom Handle set

Bathroom privacy set to suit 40-48mm Door Leaf

• 60mm diameter handle/turn

• Coin operated privacy release

• 50mm backset

• 106x66x12mm lockcase

• Complete with 25mm dia leading edge finger pull (29mm OD)

• Lever key and Europrofile cylinder versions available to special order

• Finishes: Antique Brass, Bronze, Satin Nickel, Satin Chrome, Polished Chrome, Satin Brass, Polished Brass

P7514 Bathroom Bolt 30-38mm thick doors

Bathroom handle set and functionality as per P7515

• To suit 30-38mm Door Leaf

• 127mm backset

• 63x27x4mm forend

• Requires 25mm dia x 150mm bore

• Complete with 25mm dia leading edge finger pull (29mm OD)

• Finishes: Satin Chrome, Polished Chrome, Polished Brass

P7516 Bathroom Bolt 40-48mm thick doors

Bathroom handle set and function as per P7515

• To suit 40-48mm Door Leaf

• 128mm backset

• 63x27x4mm forend

• Requires 25mm dia x 150mm bore

• Complete with 25mm dia leading edge finger pull (29mm OD)

• Suitable for use with single FD/E30 applications.

• Suitable for use with double FD/E30 if lock body wrapped in and forend/ strike bedded in 1mm intumescent – part IP7516

• Finishes: Antique Brass, Bronze, Satin Chrome, Polished Chrome, Satin Brass, Polished Brass

PC13F Catch-n-Close unit

Catch-n-Close unit only, (complete with non‑handed fixing bracket) for doors up to 80kg. Gently pulls the door to the final closed position. Manually resets on door opening.

PC10F 40kg Self Closer with Magnetic hold back

Self-closer (uncontrolled) with damper; complete with non‑handed fixing bracket and magnetic hold-open/release. For doors up to 20kg-40kg and up to 1500mm wide. Portman closers are not suitable for very lightweight doors due to the potential for excessive momentum along the door's travel.

PC11F Self Closer with Magnetic hold back

Self-closer (uncontrolled) with damper; complete with non‑handed fixing bracket and magnetic hold-open/release. For doors up to 40kg -80kg and up to 1500mm wide. Portman closers are not suitable for very lightweight doors due to the potential for excessive momentum along the door's travel.

PC15F Self Closer with 24v Emag holdback

Self-closer (uncontrolled) with damper, complete with non‑handed fixing bracket and 24v electromagnet hold-open/release. For doors up to 40kg-80kg and up to 1500mm wide. Portman closers are not suitable for very lightweight doors due to the potential for excessive momentum along the door's travel.

PC17F Self Closer with 240v Emag holdback

Self-closer (uncontrolled) and damper, complete with non‑handed fixing bracket and 240v mains electromagnet hold-open/ release. For doors 40kg-80kg and up to 1500mm wide. Portman closers are not suitable for very lightweight doors due to the potential for excessive momentum along the door's travel.

P7598 Touch Latch

With a gentle press the Portman quick release P7598 “touch latch” gently ejects the door leaf from the pocket and removes the need for a finger pull to be fitted on the leading edge of the door. Touch latch details • 95 x 30 x 60mm door mounted touch latch • Deploys door leaf 30mm • Replaces track mounted catch/magnet • Can be used with self-closer/damper options • Suitable for door leaves up to 80kg

Simultaneous Operation

These kits are used to link two doors (in a double door Portman kit) so that when the user opens or closes one door the other opens and closes at the same time. The door leaves are linked via two track mounted pulleys and door mounted brackets which require a gap at the head of the door, hence simultaneous operation is not suitable for all Portman pocket kits.

P755: Simultaneous kit for double doors, each door leaf up to 926mm wide

P757: Simultaneous kit for double doors, each door leaf up to 1300mm wide

 

Wall Reinforcing Kit (P5700)

The P5700 kit is designed for use with pocket kits whereby the door leaf exceeds 2400mm high. The kit comprises 4no 3m lengths as pictured which are to be cut to length on site, These struts sit around the dovetail profile and the between the dovetail sheet and the plasterboard providing extra wall stability, for example, at the cassette edge.

If you can't find what you're looking for please call us on 01462 444 466